Removing The Keyboard (W860Cu); Remove The Keyboard - EUROCOM W860CU Service Manual

Disassembly
Removing the Keyboard
Figure 14
Keyboard Removal
1. Turn off the computer, and remove the battery
(page 2 -
a. Press at point 1 to un-
2. W860CU: (see over for W870CU) Press at point
snap the LED cover
small screwdriver to do this).
module.
3. Turn the computer over, open the Lid/LCD and carefully lift the LED cover module
b. Lift the LED cover mod-
4. Remove screws
ule and disconnect the
5. Carefully lift the keyboard
cable.
6. Disconnect the keyboard ribbon cable
c. Remove the screws.
d. Disconnect the cable

7. Remove the keyboard.

from the locking collar.
e. Remove the keyboard.
a.
b.
c.

2. LED Cover Module
9. Keyboard
• 5 Screws
2 - 18 Removing the Keyboard
12).
- from the keyboard.
4 8
up, being careful not to bend the keyboard ribbon cable
9
10
1
2
3
4
7
5 6
(page 2 - 5), component bay cover
to unsnap the LED cover module
1
from the locking collar socket .
11
d.
e.
8
(page 2 - 10), and processor
(you may need to use a
2
and disconnect the cable
2
(Figure 14d).
10
9
11
9
.
3