Store Presets Menu; Store Preset Menu - Pacific Microsonics HDCD Model Two User Manual

Reference
63
®
Model Two HDCD User's Manual
The Meter Overload Light #2 Menu is the same as the Meter Overload Light #1 Menu except
that the threshold range for light #2 is from 0 to 3 successive full scale data words greater
than the setting for light #1. For example, if the threshold of light #1 is set to 1, light #2
can be set to a threshold of 1 to 4. If light #1 is set to 2, light #2 can be set to 2 to 5, and
so on.

Store Presets Menu

The Store Presets Menu is reached from the Operating Menu by selecting
(SETUP/MORE.../STORE_P).
The Rotary Control is used to scroll through the presets. A brief preset description is
displayed on menu line six. The description for blank presets is "UNUSED". Factory in-
stalled presets are indicated in parenthesis and cannot be stored, renamed, or erased.
Function button #1 (STORE) selects the Store Preset Menu and function button #2 (RE-
NAME) selects the Rename Preset Menu. Descriptions of these menus are below and on
page 64. Function button #3 (CLEAR) erases the selected preset. After pressing button #3,
the following message will be displayed: "Erase this preset? Press ENTER to erase, or any
other key to cancel". Pressing ENTER will erase the selected preset.

Store Preset Menu

The Store Preset Menu is reached from the Operating Menu by selecting
(SETUP/MORE.../STORE_P/STORE).
P A C I F I C M I C R O S O N I C S I N C .
Rev. C - January 2002
®