Presets; Factory Preset Configurations - Pacific Microsonics HDCD Model Two User Manual

Setup & Operation

Presets

The Model Two stores and recalls virtually all system setup parameters in labeled presets.
The preset use functions are shown below. For more information on using and storing
presets see pages 59, 63 and 64. Eighteen factory configured presets are installed.
Preset Function
Recall
Store/Rename/Erase
The factory installed presets are: AD1X-24, AD1X-16, AD1X2416, AD+DD1X, DD1X-20, DD1X-
16, DD1X-2X, DD1X-4X, AD2X-24, DD2X-2X, DD2X-24, DD2X-16, DD2X-4X, AD4X-24, DD4X-
4X, DD4X-2X, DD4X-24, DD4X-16. The setup values stored in the factory presets are listed
below.
NOTE: The preset setup values shown below appear if the 44.1_X base sample rate is
selected. If the 48 X base sample rate is selected, the setup values remain the same,
except multiples of 48 appear in place of multiples of 44.1.

Factory Preset Configurations

NOTE: The following setup values are the same for all factory presets:
Menu/FUNCTION:
Operating/MTRMODE
Operating/MTRSRCE
Second Operating/PEAKEXT
Second Operating/LOWLVL
Monitor Source
Levels/AD_GAIN or DSPGAIN
Levels/MONLVL
Digital Output Phase Invert
Digital Output HDCD Setup/PEAKEXT
Digital Output HDCD Setup/LOWLVL
Monitor Setup/PHASE
Monitor Setup/HDCD
Monitor Setup/SCALING
Meter Setup/PEAKHLD
Meter Over #1/THRSHLD
Meter Over #1/HOLD
Meter Over #2/THRSHLD
Meter Over #2/HOLD
Meter Setup/FINEREF
P A C I F I C
Rev. C - January 2002
Model Two HDCD
Menu Location
Recall Presets(SETUP/PRESETS)
Store Presets(SETUP/MORE.../STORE_P)
VALUE:
NORMAL
OUT_1 (44.1 kHz output)
OUTPUT (88.2/176.4 kHz output)
OFF
OFF
FOLWMTR
0.0
+18.0
NORMAL
OFF
OFF
NORMAL
AUTO
OFF
NONE
1
OFF
3
ON
-14
M I C R O S O N I C S
®
24
®
User's Manual
I N C .