Table of Contents
Advertisement
Setup & Operation
For 44.1 kHz or 48 kHz A/D conversion:
1.
Connect an analog signal source to the channel 1 and 2 analog inputs.
2.
From the Operating Menu, select (SETUP/MODE/44.1_X or 48_X)
3.
Connect AES Out 1 or 2 to the AES input of a 44.1/48 kHz digital audio recorder.
4.
Connect the AES output of the digital audio recorder to AES In 1.
5.
From the Operating Menu, select (SETUP/PRESETS) and select preset AD1X-24 or
AD1X-16 depending on the desired output word length.
6.
Or, from the Operating Menu, select (SETUP/MODE/MORE.../AD_44.1).
7. From the Operating Menu, select (SETUP/OUTPUT/OUT_1), then select the digital
output word length. HDCD_24 is selected by preset AD1X-24.
8.
From the Operating Menu, select (SETUP/INPUT/HDCDBIT), then select the monitor
input HDCD code detect word length to match the digital output word length.
For 88.2 kHz or 96 kHz A/D conversion:
1.
Connect an analog signal source to the channel 1 and 2 analog inputs.
2.
From the Operating Menu, select (SETUP/MODE/44.1_X or 48_X)
3.
From the Operating Menu, select (SETUP/PRESETS) and select preset AD2X-24.
4.
Or, from the Operating Menu, select (SETUP/MODE/MORE.../MORE.../AD_88.2 or 96).
5.
From the Operating Menu, select (SETUP/OUTPUT/OUTPUT), then select the
digital output word length. HDCD_24 is selected by preset AD2X-24.
6.
From the Operating Menu, select (SETUP/OUTPUT/FORMAT), then select the digital
output format. 1_WIRE selects single wire, double speed AES. 2_WIRE selects two
wire, single speed AES.
7.
If single wire was selected, connect AES Out 1 or AES Out 2 to the double speed
AES input of a digital recorder or Digital Audio Workstation. Connect the double
speed AES output of the digital recorder or DAW to AES In 1.
8.
If two wire was selected, connect AES Out 1 to a 4 channel, 24-bit or 20-bit, 44.1/
48 kHz digital audio recorder's channel 1 and 2 AES input, and AES Out 2 to the
recorder's channel 3 and 4 AES input. Or connect AES Out 1 and 2 to the AES two
wire inputs of an 88.2/96 kHz digital recorder or DAW. Connect the channel 1 and 2
AES output of the 44.1/48 kHz digital audio recorder to AES In 1, and channels 3
and 4 to AES In 2. Or connect the two wire outputs of the 88.2/96 kHz recorder or
DAW to AES In 1 and 2.
P A C I F I C
Rev. C - January 2002
Model Two HDCD
M I C R O S O N I C S
®
28
®
User's Manual
I N C .
Hide quick links:
Advertisement
Table of Contents
