Table of Contents
Advertisement
Setup & Operation
17
®
Model Two HDCD
User's Manual
Graphic Display
The back lit Graphic Display has 7 lines of text with 40 characters per line. The display
shows the current system operational, setup, and selection menus. Menu display formats
are described in detail in the Reference section, page 39. Display contrast and brightness
are adjustable using the Front Panel Display Menu. From the Operating Menu select (SETUP/
MORE.../SYSTEM/PANEL).
Menu Up and Down Buttons
These buttons are used to navigate up and down through the menu selections on the
Graphic Display. Press "UP" once to move up to the previously displayed menu or "DOWN"
to move down to the next menu in the current selection path. Pressing and holding "UP"
will step up through each previously displayed menu until the top level Operating Menu is
reached.
Function Buttons
The five Function Buttons are used to select menu options shown on the Graphic Display.
Each function button selects the menu item located directly above it on the display. Active
menu items are displayed in
reverse
while selected items are
outlined
In some cases, a function button will operate as a toggle, selecting between multiple
choices displayed above it on the Graphic Display.
Enter Button
The Enter Button is used to activate selected (outlined) items on the Graphic Display. Once
active, the item is displayed in reverse.
Rotary Control
The Rotary Control is used to make changes to the values of selected (outlined) items on
the Graphic Display. Changes to values become active immediately and may be canceled by
pressing UNDO or saved by pressing ENTER. If the Levels Menu is exited with the Rotary
Control active, it will remain active. Turning the Rotary Control one step in either direction
will recall the Levels Menu with the Control still functioning.
P A C I F I C
M I C R O S O N I C S
I N C .
Rev. C - January 2002
®
Hide quick links:
Advertisement
Table of Contents
