Set The Vcr1 Channel - ProScan PS3109YX1CH2 User Manual

SET THE
VCR1
CHANNEL
The next step lets you set the VCR1 channel. When you set the VCR1
channel, you're telling the TV what channel to tune to when you press
the VCR1 button on the remote.
For example, if you have a VCR connected to the Video 1 input jacks
on the back of the
TV,
you want the TV to tune to the Video 1 input
channel when you press the VCR1 button. If you don't have a VCR1
component connected to the
TV,
skip this step or select Not Connected
from the VCR1 Channel choice list. (For more, see Auto Tuning in the
Quick Reference section.)
1. Press MENU to bring up the VCR1 choice list.
2,
Point to the choice that matches the way you have your VCR
connected to the TV.
If you used the Connections Foldout to hook up your
TV,
use the
table shown at the right to select the VCR1 channel.
3. Press MENU to continue.
If you used
Connection A
Connection B
Connection C
Connection D
Connection E
Connection F
Connection G
Connection H
Connection I
Select
Video 1 input
Video 1 input
Video 1 input
Video 1 input
Not Connected
Not Connected
Video 2 input
Channel 3_
Video 2 input
Or Channel 4, depending on
how your VCR's 3/4 switch is set.
19