Set The Vcr1 Channel (Auto Tuning); Set Thevcr2 Channel (Auto Tuning) - ProScan PS27500 User Manual

INTERACTIVE SETUP
SET THEVCRI
CHANNEL (AUTO TUNING)
The next step lets you set the VCR1 channel. When you set the VCR1
channel, you're telling the TV what channel to tune to when you press
the VCR1 button on the remote. This is Auto Tuning.
Indicate which input you used to connect the VCR. If you don't have a
VCR1 component connected to the TV, skip this step or select Not
Connected from the VCR1 Channel choice list. (For more, see Auto
Tuning in the Features and Menus section.)
1. Press MENU or OK to bring up the VCR1 choice list.
.
Point to the choice that matches the way you have your VCR
connected to the TV.
3. Press MENU or OK to continue.
SET THEVCR2 CHANNEL (AUTO TUNING)
The next step lets you set the VCR2 channel. When you set the VCR2
channel, you're telling the TV what channel to tune to when you press
the VCR2 button on the remote.
Indicate which input you used to connect a second VCR. If you don't
have a second VCR component connected to the TV, skip this step or
select Not Connected from the VCR2 Channel choice list. (For more,
see Auto Tuning in the Features and Menus section.)
15