The Basic Connection; Set The Vcr1 Channel (Auto Tuning) - ProScan PS27600YX1AL4 User Manual

SETUP AND CONNECTIONS
THE BASIC CONNECTION
The basic connection below (TV and VCR) is the most common
connection and is therefore used to illustrate a single component
connection with your TV. For better sound and picture quality and
multiple component connection information refer to the next section,
Advanced Connections.
CABLES
You will use the following cable to make your connection:
Coaxial Cables: These cables carry both the audio
and video signal to the TV from an antenna, cable,
or cablebox. In this connection, a second Coaxial
Cable carries the signal through the VCR to the TV.
CABLE, CABLE BOX, OR ANTENNA
VCR 1
I OUT
VEDEO AUDIO
TV
INPUT2
ou_lo TV
How
ToVIEw THEVCPx
To watch the VCR in this connection tune TV to
Channel 3 or 4.
Later, in the Interactive Setup section you will
program the TV to automatically tune to Channel 3
or 4 when you turn on the VCR.
Once you have completed this connection you may skip to Step 3,
"Connecting the IR Controller."
Your TV May Differ 1
Model PS27600 does not have an
S-Video jack for INPUT2 nor external
speaker terminals.
5