Connecting Your Tv; Tv Only - ProScan PS3109YX1CH2 User Manual

STEP
I
Unpack the TV. Make sure to locate the remote control and
Connections Foldout.
Important Information
CAUTION: Matching stands were designed to be used with the table
model TV included in this book. The recommended stands are
provided with hardware to secure the TV to the stand so that it cannot
be easily pushed off, pulled off or tipped over. Your ProScan dealer can
help you choose the appropriate stand for your TV.
If you choose not to use the stand recommended for your TV, take
precautions that the stand or other furniture the TV is placed on is
properly located (see Important Safeguards sheet) and of adequate size
and strength to prevent the TV from accidentally being pushed off,
pulled off or tipped over. This could cause damage to the TV and or
personal injury.
Stands are not available by mail order. To locate your nearest ProScan
dealer, call 1-800-PROSCAN.
STEP 2:
CONNECTING YOUR
TV
If you're only going to connect the TV to your home antenna or cable
system, use the "TV Only" connection shown below. If you're going to
connect the TV to a VCR, satellite receiver, DVD player or other
component, look at the Connections Foldout. The Connections
Foldout details ten diagrams that are recommended for hooking up the
TV to a cable box or antenna, one or two VCRs, a laserdisc player, and
a satellite receiver.
TV ONLY
This is a basic connection from an antenna or cable system to your TV.
Connect the cable as shown. If you have a VCR or other components
to connect to the TV, skip to the top of the next page.
4