Table of Contents
Advertisement
TV,
(2)
VCRS,
AND
SATELLITE
RECEIVER
(CONNECTION
I)
This information
applies to Connection
I in the Connections
Foldout.
Connection
I provides:
stereo sound from broadcast
programs
stereo sound from VCR
Picture in Picture (PIP)
watch one channel
on TV while recording
another channel
To use this connection
you must have:
(5) coaxial cable
(9) audio/video
cables
(1) S-Video cable (optional)
To connect:
1.
Connect cables as shown
in Connection
I.
2.
Return to First Things First, then follow
the steps in the Interactive
Setup.
USING
CONNECTION
I
To watch TV programs:
1.
Turn VCR and satellite
receiver
and laserdisc player off.
2.
Press TV and tune to a channel.
To watch Satellite programming:
1.
Press SAT-CABLE
and tune to a channel.
To record from one VCR to the other (tape dubbing):
1.
Turn satellite
receiver
off.
2.
Insert original
tape into VCR2.
3.
Insert blank tape into VCR1.
4.
PressVCR1.
5.
Set VCR to line input (for more, see your VCR User Manual).
6.
Press RECORD to begin recording.
7.
Press DVD.VCR2,
then press PLAY.
8.
If you want to watch a different
channel,
set the TV/VCR
switch
on both VCRs to TV; press TV; then tune to a channel.
66
Advertisement
Table of Contents
