Yamaha RX-V571 Owner's Manual page 80

SOURCE_
SET
RECEIVER
HDMI1-5
V-AUX
AV1-6
AUDIO
DOCK
TUNER
USB
operation keys
INPUT
MUTE
TVVOL
TV CH
TV_
keys
Operating external devices
When the remote control codes for external devices are assigned to
an input selection key, the external device can be controlled with
the following keys after selecting the appropriate input source or
SCENE.
• Use SOURCE/RECEIVER to switch the device to be controlled with menu
operation keys and numeric keys between the unit and external devices. The unit
can be controlled when SOURCE/RECEIVER glows orange. External devices can
be controlled when the key glows green.
SOURCE ('1_
Menu operation
keys
External device
operation keys
Numeric keys
TV operation keys
Turns on and off external
devices.
Cursor Selects an item.
ENTER Confirms a selected item.
RETURN Returns to the previous screen.
DISPLAY Switch the content of display.
TOP MENU Displays the top menu.
POP-UP MENU Displays a pop-up menu.
m Stops playback.
| | Stops playback temporarily.
Starts playback of the currently
selected song (or video).
Searches backwards/forwards
while pressing them.
Skips to the beginning of the
currently playing song (or
video)/the next song (or video).
Enter numbers.
Operate a TV.
Initializing all remote control codes
Initializing all remote control codes to the initial factory settings.
2
3
Press CODE SET using a pointed object such as the
tip of a ballpoint pen.
SOURCE/RECEIVER blinks twice.
Perform each of the following steps within 1 minute. Settings
will be automatically stopped if more than 1 minute passes
after the last operation. To reset, repeat from step 1.
Press SOURCE/RECEIVER.
Enter "9981" using the numeric keys.
Once the remote control code is reset successfully SOURCE/
RECEIVER will blink twice. If the reset fails, SOURCE/
RECEIVER blinks six times. If setup fails, repeat from step 1.
• The keys above are only available when there are the corresponding keys on the
remote control of external devices.
En 80