Yamaha RX-V575 Easy Setup Manual
  1. Manuals
  2. Brands
  3. Yamaha Manuals
  4. Receiver
  5. RX-V575
  6. Easy setup manual

Yamaha RX-V575 Easy Setup Manual

Av receiver
Hide thumbs Also See for RX-V575:
1
2
3
4
5
6
7
8

Advertisement

Table of Contents

See also: Owner's Manual , Setup Manual
Enlarged version
AV Receiver
Easy Setup Guide
English
This document explains how to set up a 5.1- or 7.1-channel system (RX-V575
only) and play back surround sound from a BD/DVD on the unit.
To reduce the impact on natural resources, the Owner's Manual for this product is
supplied on CD-ROM. For more information about this product, refer to the
Owner's Manual on the supplied CD-ROM.
PDF versions of this guide and "Owner's Manual" can be downloaded from the
following website.
http://download.yamaha.com/
[For U.S. customers only]
Visit the following website for additional information, FAQ's, downloads such as
"Owner's Manual" and product updates.
http://usa.yamaha.com/support/
UAB
1
Preparation
Accessories
Check that the following accessories are supplied with the product.
Remote control
AM antenna
CD-ROM
(Owner's Manual)
• The illustrations of the main unit and remote control used in this guide are of the RX-V575 (U.S.A.
model), unless otherwise specified.
Cables required for connections
The following cables (not supplied) are required to build the system described in this
document.
• Speaker cables (depending on the number of speakers)
• HDMI cable (x2)
• Audio pin cable (x1)
• Digital optical cable (x1)
Batteries
(AAA, R03, UM-4) (x2)
Insert the batteries the right way round.
FM antenna
YPAO microphone
*The supplied FM antenna
varies depending on the
region of purchase.
Safety Brochure
Easy Setup Guide
(not required if your TV supports ARC [Audio Return Channel])

Advertisement

Table of Contents
loading

Related Manuals for Yamaha RX-V575

Summary of Contents for Yamaha RX-V575

  • Page 1 This document explains how to set up a 5.1- or 7.1-channel system (RX-V575 only) and play back surround sound from a BD/DVD on the unit. • The illustrations of the main unit and remote control used in this guide are of the RX-V575 (U.S.A. model), unless otherwise specified.

  • Page 2: Placing Speakers

    Set up the speakers in the room using the following diagram as a reference. For information on other speaker systems, refer to “Owner’s Manual”. 5.1-channel system 7.1-channel system (RX-V575 only) 10° to 30° 10° to 30° 30 cm (1 ft) or more...

  • Page 3: Connecting Speakers/Subwoofer

    Connecting speakers/subwoofer • (U.S.A. and Canada models only) Connect the front speakers (1/2) Connect the center speaker (3) to the Under its default settings, the unit is configured for 8-ohm to the FRONT (//\) terminals. CENTER terminal. speakers. When connecting 6-ohm speakers, set the unit’s speaker impedance to “6 Ω...
  • Page 4 For 7.1-channel system (RX-V575 only) Connect the surround speakers (4/ Connect the subwoofer (9) to the 5) to the SURROUND (//\) SUBWOOFER PRE OUT jack. Connect the surround back speakers (6/ terminals. 7) to the SURROUND BACK (//\) terminals. • Use a subwoofer equipped with built-in amplifier.

  • Page 5: Connecting External Devices

    Connecting external devices Before connecting the power cable (General model only) Make sure you set the switch position of VOLTAGE SELECTOR according to your local voltage. Voltages are AC 110-120/220-240 V, 50/60 Hz. Audio out (optical) HDMI in HDMI out BD/DVD player Connect external devices to the unit.

  • Page 6: Optimizing The Speaker Settings Automatically (Ypao)

    Connect the YPAO microphone to the YPAO MIC jack on the front panel. The Yamaha Parametric room Acoustic Optimizer (YPAO) function detects speaker connections, measures the The following screen appears. distances from them to your listening position(s), and then automatically optimizes the speaker settings, such as volume balance and acoustic parameters, to suit your room.
  • Page 7 If “W-1:Out of Phase” appears • If the cursor keys do not work, press SOURCE/RECEIVER (to light up the key in orange) and then use the cursor keys. Follow the procedure below to check the speaker • If any error message (such as E-1) or warning message (such connections.

  • Page 8: Playing Back A Bd/Dvd

    No sound is coming from a specific speaker Selecting the input source and MUTE MUTE See “Troubleshooting” in “Owner’s Manual”. favorite settings at once For more information, see “What you can do with the unit”. © 2013 Yamaha Corporation Printed in Malaysia ZF49150...

This manual is also suitable for:

Rx-v475

Table of Contents