Yamaha RX-V571 Owner's Manual page 47

Connect theUSB cable totheUSB portonthe
front
panel.
Procedure
Connect an iPod as follows. Refer to the manual for iPod dock also.
USB
• For connecting iPhone, use the YDS-12.
Turn the unit to the standby mode, and then connect
the iPod dock to the DOCK jack.
Keep the iPod dock as far away from the unit as possible.
3
4
Press USB to select "USB" as the input source.
Select the content of the iPod, and then start
playback.
• To operate with a TV monitor (p.49)
• To operate with iPod itself (p.52)
• Video signals cannot be output using the USB cable supplied with iPod.
• If noises are heard while using iPhone, change the position of the iPhone.
Using the iPod dock to connect an iPod
Connect the iPod to the unit with the optional Yamaha iPod universal
dock.
Featu res
• Playing back not only songs but also video
• Operating iPod using the unit's remote control.
• Displaying the content list and playback informations of the iPod on a
TV monitor.
Supported iPod
iPod touch, iPod nano, iPod classic, iPod with video, iPod with color
display, iPod with click wheel, iPod mini, iPhone4, iPhone 3GS,
iPhone 3G, iPhone
The unit (rear)
Yamaha iPod universal dock
Connect the iPod to the iPod dock, and then turn on
this unit.
Press DOCK to select "DOCK" as the input source.
Select the content of the iPod, and then start
playback.
• To operate with a TV monitor (p.49)
• To operate with iPod itself (p.52)
• When the iPod is connected to the iPod dock, the iPod can be charged.
You can set whether or not to charge the iPod when the unit is in the standby
mode, in 'Standby Charge" (p.62) on the "Option" menu.
En
47