Yamaha RX-V571 Owner's Manual page 63

CONFIGURATIONS
The settings of the unit can be changed from the "Setup" menu
displayed on the TV screen.
Press the cursor keys (A/v) to select an item (p.64)
and press ENTER.
SETUP
ENTER
RETURN
• Connect the unit and a TV with an HDMI cable to display the "Setup" menu. If the
TV is not connected with an HDMI cable, reconnect it with an HDMI cable.
Press SETUP.
When the HDMI control function is enabled on both the unit and
a TV that supports the HDMI control, the TV may automatically
operate as follows when SETUP is pressed.
• The TV turns on.
• The video input on the TV is switched to the HDMI input connected
to the unit.
• The "Setup" menu is displayed on the TV screen.
%
L Press the cursor keys (<lIE>) to select the menu you
want to configure.
Menu items Selected item
• When pressing ENTER to select an item that has a folder icon ([_), a detail
setting menu is displayed. Press RETURN to close the detail settings menu
and return to the previous menu screen.
Press the cursor keys (A/V/<_/E>) to adjust the
setting and press ENTER.
Selected menu Current settings and folders
• Menus can be selected while the menu cursor is displayed (white box around
the menu icon). When configuring the settings, press RETURN repeatedly to
be able to select menus.
• For details on settings in the "Setup" menu, refer to the "Setup menu list"
(p.64).
5
• Operation procedures vary depending on selected items. For details, refer to
the directions for each setting item.
Press SETUP to close the "Setup" menu.
En
63