Yamaha RX-V571 Owner's Manual page 23

Con necting playback devices
The unit is equipped with various types of input jacks such as an HDMI jack. Connect
them to the appropriate output jacks on the playback devices.
For connecting an iPod, Bluetooth devices and USB storage devices, refer to the
following pages.
• Connecting an iPod (p=46)
• Connecting a Bluetooth wireless audio receiver (p=53)
• Connecting a USB storage device (p.55)
Connecting video devices (such as BD/DVD players)
Video devices, such as BD/DVD players, set-top boxes (STBs) and cable TV, and game
consoles, are connected to the unit. Select the correct connection according to the
output jacks (video/audio) of video devices connected to the unit. If a video device
supports HDMI, HDMI connection is recommended.
• Video signals input with an HDMI cable can only be output to a TV connected to the unit with an HDMI
cable.
• When an input jack of the unit does not match the output jack of a video device, select another jack of the
unit for the video device (p.25).
HDMI connection
Connect a video device to the unit with an HDMI cable.
The unit (rear)
Component video connection
Connect a video device to the unit with a component cable and an audio cable (an
optical cable or a coaxial cable). Input jacks of the unit (AV1-2) are different depending
on the audio jacks of the video device.
AV1-2
(COMPONENT VIDEO) jacks
..... ............
iIiiiiiiiiiiiiii!ii!i!iiiiiiiiiiiiii!iiiil i iiiiiiiiiiii!iiiiiiiiiiiiii!ii !iii!!ililiiii
i o°°i
Video output
(Component video)
co%%E.T
w
..............
L_ _v_-: 1 _4/.z3_,,,,:_ Video device
ack or [o _ .IAudio output
AV2 (COAXIAL) jack (Digital optical or coaxial)
By selecting an input source with the AV1-2 key, audio and video from video devices are
output from the unit.
HDMI 1-5 jacks
By selecting the input source with the HDMI 1-5 key, audio and video from video
devices are output from the unit.
En
23