Yamaha RX-V571 Owner's Manual page 12

Speaker layout
Select the speaker layout depending on the numbers of speakers, and then place the speakers and subwoofer (with a built-in amplifier) in the room.
The following section describes the representative speaker configuration of 2.1 to 7.1 channel system.
NOTEr_
• (U.S.A. and Canada models only) The unit is configured to 8-Qspeakers as the factory setting. 6-Qspeakers can be also connected. For details on settings for 6£_speaker connection, refer to "Changing the speaker
impedance (U.S.A. and Canada models only)" (p.76).
• (Except for U.S.A. and Canada models) Use speakers with an impedance of at least 6£2.
Front (L)
Front (R) |
Center
Surround (L)
Surround (R)
Surround back (L)
Surround back (R)
Surround back |
Subwoofer
For the front channel sound (stereo sound) and effect sound
• •
• •
• •
• •
For the center channel sound (dialogue, vocals, etc.)
For effect and vocal sound from surround channel. Sound from surround back channel is also output when you do not use
surround back speakers.
• •
• •
• •
For the surround back channel sound and effect sound from rear.
For the surround back channel sound mixed with left and right and effect sound from rear.
For low-frequency effect (LFE) sound and bass sound from front and surround channels.
• •
• To get recommended speaker layout, refer to "Ideal speaker layout" (p.87).
En
12