Yamaha RX-V571 Owner's Manual page 17

The unit is equipped with the following input/output jacks. Use jacks and cables appropriate for devices.
Audio/video jacks Analog video jacks
HDMI jacks
Digital videos and sounds are transmitted. Use an HDMI
cable for connection.
HDMI cable
PR
• Use a 19-pin HDMI cable with the HDMI logo. Using an HDMI cable
lessthan5.0 m (16.4ft.) long is recommended to preventsignal PB
qualitydegradation.
• When
connectingan external d evicewith a DVl
jack, use
an HDMI/ y
DVI-Dcable.
• The HDMI control function, the Audio Return Channel function and
transmission of 3D content are supported.
COMPONENT VIDEO jacks
The signal is separated into three devices:
Luminance (Y), chrominance blue (PB) and
chrominance red (PR).
Use a component video pin cable with three plugs.
Component video cables
Red
Blue
Green
S VIDEO jack (U.K. and Europe models only)
This jack transmits S-video signals that include
luminance (Y) and chrominance (C) components. Use
S-video cable.
S-video cable
Audio jacks
OPTICAL jacks
These jacks transmit optical digital audio signals. Use
fiber-optic cables for connection. Remove the cap
before using if needed.
Digital optical cable
COAXIAL jacks
These jacks transmit coaxial digital audio signals. Use
coaxial cables.
Digital coaxial cable
AUDIO jacks
These jacks transmit conventional analog audio signals.
Use stereo pin cables.
Stereo pin cable
VIDEO jack
This jack transmits conventional analog video signal.
Use a video pin cable.
Video pin cable
En
17