Yamaha RX-V573 Quick Setup Manual
  1. Manuals
  2. Brands
  3. Yamaha Manuals
  4. Receiver
  5. RX-V573
  6. Quick setup manual

Yamaha RX-V573 Quick Setup Manual

Hide thumbs Also See for RX-V573:
1
2
3
4
5
6
7
8

Advertisement

Table of Contents

See also: Owner's Manual
Enlarged version
AV Receiver
Easy Setup Guide
English
This document explains how to set up a 5.1- or 7.1-channel system (RX-V573
only) and play back surround sound from a BD/DVD on the unit.
To reduce the impact on natural resources, the Owner's Manual for this product is
supplied on CD-ROM. For more information about this product, refer to the
Owner's Manual on the supplied CD-ROM.
PDF versions of this guide and "Owner's Manual" can be downloaded from the
following website.
http://download.yamaha.com/
[For U.S. customers only]
Visit the following website for additional information, FAQ's, downloads such as
"Owner's Manual" and product updates.
http://usa.yamaha.com/support/
UAB
1
Preparation
Accessories
Check that the following accessories are supplied with the product.
Remote control
AM antenna
CD-ROM
(Owner's Manual)
• The illustrations of the main unit and remote control used in this guide are of the RX-V573 (U.S.A.
model), unless otherwise specified.
Cables required for connections
The following cables (not supplied) are required to build the system described in this
document.
• Speaker cables (depending on the number of speakers)
• HDMI cable (x2)
• Audio pin cable (x1)
• Digital optical cable (x1)
Batteries
(AAA, R03, UM-4) (x2)
Insert the batteries the right way round.
FM antenna
YPAO microphone
*The supplied FM antenna
varies depending on the
region of purchase.
Safety Brochure
Easy Setup Guide
(not required if your TV supports ARC [Audio Return Channel])

Advertisement

Table of Contents
loading

Related Manuals for Yamaha RX-V573

Summary of Contents for Yamaha RX-V573

  • Page 1 This document explains how to set up a 5.1- or 7.1-channel system (RX-V573 only) and play back surround sound from a BD/DVD on the unit. • The illustrations of the main unit and remote control used in this guide are of the RX-V573 (U.S.A. model), unless otherwise specified.

  • Page 2: Placing Speakers

    Set up the speakers in the room using the following diagram as a reference. For information on other speaker systems, refer to “Owner’s Manual”. 5.1-channel system 7.1-channel system (RX-V573 only) 10° to 30° 10° to 30° 30 cm (1 ft) or more...

  • Page 3: Connecting Speakers/Subwoofer

    Connecting speakers/subwoofer • (U.S.A. and Canada models only) Connect the front speakers (1/2) Connect the center speaker (3) to the Under its default settings, the unit is configured for 8-ohm to the FRONT (//\) terminals. CENTER terminal. speakers. When connecting 6-ohm speakers, set the unit’s speaker impedance to “6 Ω...
  • Page 4 For 7.1-channel system (RX-V573 only) Connect the surround speakers (4/ Connect the subwoofer (9) to the 5) to the SURROUND (//\) SUBWOOFER jack. Connect the surround back speakers (6/ terminals. 7) to the SURROUND BACK (//\) terminals. The unit (rear)

  • Page 5: Connecting External Devices

    Connecting external devices Before connecting the power cable (General model only) Make sure you set the switch position of VOLTAGE SELECTOR according to your local voltage. Voltages are AC 110-120/220-240 V, 50/60 Hz. Audio out (optical) HDMI in HDMI out BD/DVD player Connect external devices to the unit.

  • Page 6: Optimizing The Speaker Settings Automatically (Ypao)

    Connect the YPAO microphone to the YPAO MIC jack on the front panel. The Yamaha Parametric room Acoustic Optimizer (YPAO) function detects speaker connections, measures the The following screen appears. distances from them to your listening position(s), and then automatically optimizes the speaker settings, such as volume balance and acoustic parameters, to suit your room.
  • Page 7 If “W-1:Out of Phase” appears • If any error message (such as E-1) or warning message (such as W-2) appears, see “Error messages” or “Warning Follow the procedure below to check the speaker messages” in “Owner’s Manual”. connections. • If the warning message “W-1:Out of Phase” appears, see “If Depending on the type of speakers or room “W-1:Out of Phase”...

  • Page 8: Playing Back A Bd/Dvd

    (without Playing back from iPod SCENE SCENE sound field processing). RADIO RADIO • (RX-V573 only) SETUP SETUP OPTION OPTION If you play back 5.1-channel audio on the 7.1-channel system, By using a USB cable supplied with iPod, you no sounds will be heard from the surround back speakers.

This manual is also suitable for:

Rx-v473

Table of Contents