Yamaha RX-V571 Owner's Manual page 22

Connecting a TV
Connection method 4 (TVwithout HDMI input jacks)
Connect a TV by any of the following connections depending on the input jack for TV
video that is used.
By switching the input source to "AV4" with AV4 on the remote control or SCENE (TV),
TV sound is output from the unit.
• When connecting to a TV with a cable, other than an HDMI cable, operations with TV screen (such as the
setting of the unit, operations of iPod/USB devices) are not available.
• When connecting a TV with a cable, other than an HDMI cable, available video signals are limited as
follows. For details, refer to the "Video signal flow" (p.91).
- Video signal from the HDMI input jacks are not output from the video output jacks other than HDMI.
- The component video and composite video signals input from an external device are only output from the
MONITOR OUT jacks.
- The S-video signals input from an external device are only output from the HDMI OUT jack (U.K. and
Europe models).
• When the AV4 jack is used for another device, or another terminal, except for an OPTICAL jack (with an
optical cable), is used for inputting TV sound, select another jack (any of AV1-6 or AUDIO) for the
connection. Also, set the input sources setting of SCENE (TV) (p.35).
COMPONENT VIDEO connection (with a component cable)
MONITOR OUT Video input
(COMPONENT VIDEO) jack (Component video)
COMPONENT
TV
Audio output
(Digital optical)
VIDEO connection (with a video pin cable)
MONITOR OUT
The unit (rear) (VIDEO) jack
AV4 (OPTICAL) jack
Audio output
(Digital optical)
Video input
(Analog video)
VIDEO
®
TV
En
22