3.5.2 Additional Equipment Required
•
Antenna sealant (use manufacturer's instructions, install according to FAA AC 43.13-2A).
•
Cables: The installer will fabricate and supply all system cables.
•
Hardware: #6-32 x 100
and Nutplates supplied in nutplate kit 011-01019-00.
•
Stereo headphone jacks (up to 6), microphone jacks (up to 6), 3.5mm stereo jacks (up to 2),
and insulating washers for all.
3.6 Installation Considerations
The GMA 1347 interfaces with the GDU, GIA, and with various avionics equipment. Fabrication of a
wiring harness is required. Sound mechanical and electrical methods and practices are required for
installation of the GMA 1347.
Page 3-6
Revision D
°
Flat Head Screw (6 ea.) and #6-32 Self-Locking Nut (6 ea.). Screws
G900X/G950 Installation and Maintenance Manual – GMA 1347
190-00719-00