5. Press the ENT key.
Figure 15-3. Example Airframe – System Upload Page
For No-EIS installations, uncheck the GEA software and configuration boxes before
pressing the LOAD softkey.
For G900X systems (not G950 systems) upgrading to a system software versions prior to
0718.02, ensure the CAL configuration boxes are unchecked or all user calibrated
parameters (e.g. fuel level, flaps/trim, etc) will be erased. Refer to Figure 15-4.
6. Press the LOAD softkey.
G900X/G950 Installation and Maintenance Manual – Software, Configuration, and Calibration
190-00719-00
NOTE
WARNING
Figure 15-4. Unchecked CAL Box
Page 15-7
Revision D