Unit Installation; Continued Airworthiness - Garmin G900X Installation And Maintenance Manual

Integrated flight deck

Hide thumbs Also See for G900X:

Table of Contents

Unit Installation

For final installation and assembly, refer to the outline and installation drawings shown in Appendix E of

this manual.

1. Assemble the connector backshells.

2. Connect both connectors to the rear plate using the screws provided in the connector kit.

3. Mount the unit rack to the main system rack or other suitable mounting location using the provided

4. Assemble the rear plate into the GEA 71 unit rack.

5. Insert the GEA 71 into the rack, noting proper orientation as shown on the installation drawing in

Do not use excessive force when inserting the GEA 71 into the rack. This may cause

damage to occur to the connectors, unit, and/or unit rack. If heavy resistance is felt

during installation, stop! Remove the GEA 71 and identify the source of resistance. The

rear plate is designed to float in the unit rack. Check to ensure the rear plate is not bound

by the connector harness.

6. Lock the GEA 71 in place using the lever-locking handle. Fasten the handle to the GEA 71 body

using the provided Phillips screw.

Start the handle screw into the hole carefully, to avoid cross-threading. Do not apply

torque in excess of 14 in-lbs to the handle screw. The application of torque exceeding 14

in-lbs to this screw will damage the LRU case and/or retaining hardware.

Maintenance of the GEA 71 is "on condition" only.

G900X/G950 Installation and Maintenance Manual – GEA 71

190-00719-00

Show Quick Links

Table of Contents