15.2.3.7 Electrical_Turboprop
Selection Order
Required?
Multiple Selections
Allowed?
Purpose
The following selections are available for configuration of the selected G900X/G950 electrical turboprop
system (1 required):
•
28 Volt System, 300 Amp Generator, 100 Amp Alternator
1. Activate the cursor and use the FMS knob to highlight "Electrical" in the AIRFRAME field.
2. Press the ENT key.
3. Using the FMS knob, select the appropriate electrical system (14 or 28 Volt System) in the FILE
field.
Figure 15-14. Example Electrical – System Upload Page
4. Press the ENT key.
5. Press the LOAD softkey. The system automatically determines what software needs to be loaded.
G900X/G950 Installation and Maintenance Manual – Software, Configuration, and Calibration
190-00719-00
4th
Yes, except for No-EIS installations.
No
The "Electrical_Turboprop" configuration parameters set the
appropriate voltage and ammeter display ranges
Page 15-17
Revision D