Garmin G900X Installation And Maintenance Manual page 543

D.4.2 Database and Software Alerts
Message
MFD1 DB ERR – MFD1
aviation database error exists.
PFD1 DB ERR – PFD1
aviation database error exists.
PFD2 DB ERR – PFD2
aviation database error exists.
MFD1 DB ERR – MFD1
basemap database error
exists.
PFD1 DB ERR – PFD1
basemap database error
exists.
PFD2 DB ERR – PFD2
basemap database error
exists.
G900X/G950 Installation and Maintenance Manual – Troubleshooting
190-00719-00
Cause
The MFD has
encountered an error in
the Jeppesen database.
PFD1 has encountered an
error in the Jeppesen
database.
PFD2 has encountered an
error in the Jeppesen
database.
The MFD has
encountered an error in
the basemap database.
PFD1 has encountered an
error in the basemap
database.
PFD2 has encountered an
error in the basemap
database.
Solutions
•
Reload aviation database into the
display.
•
Contact Garmin Technical Support
for assistance.
•
Confirm supplemental data card is
inserted fully in the bottom slot of the
display.
•
Remove the supplemental data card
from the bottom slot of the display
and insert in the top slot.
−
If the problem is resolved, the
bottom card slot is dirty or has
failed. Try reinserting the card
multiple times in the bottom slot
to clean the card contacts. If the
problem remains in the bottom
slot, you may leave the card in
the top slot (if the top slot if
unused) or replace the display.
•
Swap with a supplemental data card
from another display in the same
system.
−
If problem moves to the other
display; you may either copy the
file "bmap.bin" from the good
card to the bad one or replace
all the supplemental datacards
as a set. If the basemap data
files are corrupt on both cards,
contact Garmin Product Support
for a copy of the database.
−
If problem remains in the same
GDU, replace that GDU.
Page D-31
Revision D