Garmin G900X Installation And Maintenance Manual page 456

C.1.3.2 GTX 33 Configuration Check
Follow the instructions below to verify the GTX 33 has been configured correctly.
1. Place the G900X in Configuration mode (see Section 15).
2. Use the FMS knob to select the Transponder Configuration page (Figure C-6).
Figure C-6. Example Transponder Configuration Page
3. Verify the ADDRESS is set to "US TAIL" and the appropriate N# is entered.
For installations with two GTX 33 transponders:
4. Use the FMS knob to select "XPDR2" in the SELECT TRANSPONDER field and press the ENT
key.
5. Verify the ADDRESS is set to "US TAIL" and the appropriate N# is entered.
Page C-12
Revision D
G900X/G950 Installation and Maintenance Manual – PICP & Warranty Registration
190-00719-00