Garmin G900X Installation And Maintenance Manual page 246

8. New software is loaded to the MFD. When complete, the MFD starts in configuration mode.
9. Remove the G900X/G950 Loader Card from the MFD and insert it into the top card slot on PFD
#1. Repeat Steps 3 through 7 for PFD #1 and PFD #2 (if installed).
10. When the PFD(s) load is complete, it starts in the configuration mode. Do not remove power.
For the rest of the software/configuration procedure, do not operate the MFD while
loading software or configuration files unless specifically instructed to do so. A failed or
cancelled load may result.
Page 15-4 G900X/G950 Installation and Maintenance Manual – Software, Configuration, and Calibration
Revision D
IMPORTANT
190-00719-00