New Location; Entering A New Location; Acquiring Satellites - Garmin G300 for Cessna SkyCatcher Pilot's Manual

NEW LOCATION

The 'New Location' menu option on the INFO Page is used when the GPS
Receiver is having trouble finding the satellites it expects to be there.

Entering a new location:

1) From the INFO Page, while the unit is searching for satellites, press the
MENU Key.
2) With 'New Location' menu option highlighted, press the INFO Key.
3) Move the FMS Joystick to highlight 'Use Map' or 'Use Identifier', and
press the ENT Key.
4) After selecting your approximate position using the map pointer or
entering an identifier, press the ENT Key.
5) The GPS Receiver will begin a new search based on the location
entered.

ACQUIRING SATELLITES

When the receiver is in the process of acquiring enough satellite signals for
navigation, the receiver uses satellite orbital data (collected continuously from the
satellites) and last known position to determine the satellites that should be in
view. "Acquiring Satellites" is indicated as the solution until a sufficient number
of satellites have been acquired for computing a solution.
When the receiver is in the process of acquiring a 3D differential GPS solution,
"3D GPS Location" is indicated as the solution until the 3D differential fix has
finished acquisition.
190-00921-00 Rev. E Garmin G300 Pilot's Guide
System Overview
35