Automatic Waypoint Selection - Garmin G300 for Cessna SkyCatcher Pilot's Manual

Automatic waypoint selection:

Automatic waypoint selection is the system's attempt to deduce what
Waypoint to display based on the aircraft's location in relation to the departure
airport and/or the waypoints in the Flight Plan.
The pilot can override Automatic Waypoint Selection by manually entering
a waypoint. The automatic selection will not resume until such time that the
manually entered waypoint and the automatically selected waypoint coincide
(does not apply if the CHART Softkey is selected). To manually return to
Automatic Waypoint Selection, highlight the identifier and press the CLR Key.
COM/NAV
Freq. Info.
-Identification
-Frequency
-Availability
-Additional
Information
INFO Softkey
Selected
Runway
Information
-Designation
-Length/Width
-Surface
-Lighting
-Displaced
Threshold
-Traffic Pattern
-Wind (Full-
Screen)
RUNWAY
Softkey
Selected
190-00921-00 Rev. E
-Waypoint Identifier/Symbol/Type
-Facility Name
-City/Region
Waypoint Page (INFO Softkey Selected)
(Single Display)
Waypoint Page (RUNWAY Softkey Selected)
(Single Display)
Garmin G300 Pilot's Guide
GPS Navigation
Airport
Information
-Elevation
-Fuel Available
-Time Zone
(UTC Offset)
-Lat/Long (Full-
Screen)
-Bearing/Distance
Map
Showing
Selected
Waypoint
97