Garmin G300 for Cessna SkyCatcher Pilot's Manual page 132

GPS Navigation
Selecting RECENT WPTS, NRST APTS, or FPL WPTS as a direct-to
destination:
1) Press the Direct-to Key. The Direct-to Window is displayed (with
the active flight plan destination as the default selection or a blank
destination if no flight plan is active).
2) Press the RECENT Softkey to display a list of recent waypoints
(RECENT WPTS) only or turn the FMS Joystick counter-clockwise to
display a list of recent waypoints (RECENT WPTS), nearest airports
(NRST APTS), and flight plan waypoints (FPL WPTS).
3) Move the FMS Joystick to select the desired waypoint.
4) Press the ENT Key.
5) With 'Activate' highlighted, press the ENT Key.
114
Direct-to Window (Single Display)
Garmin G300 Pilot's Guide 190-00921-00 Rev. E