Flight Plan Data Fields - Garmin G300 for Cessna SkyCatcher Pilot's Manual

Flight Planning

FLIGHT PLAN DATA FIELDS

By default, the Data Fields on the Active and Saved Flight Plan Pages are set to
display Leg Desired Track (DTK), Leg Distance (DIST), and Leg Estimated Time En
Route (ETE). The first two Data Fields can be changed using the Page Menu. The
last Data Field can be changed using the FMS Joystick.
Changing the information shown in the flight plan data fields:
From the Active Flight Plan Page or the Saved Flight Plan Page, move
the FMS Joystick (right or left) to quickly change the third data field.
Or:
1) From the Active Flight Plan Page or the Saved Flight Plan Page, press
the MENU Key.
2) Turn or move the FMS Joystick to highlight 'Change Data Fields' and
press the ENT Key. The cursor is displayed on the first Data Field.
3) If desired, move the FMS Joystick to highlight the second Data Field.
4) Turn the FMS Joystick to access the list of available Data Fields.
5) Turn or Move the FMS Joystick to highlight the desired option from the
list and press the ENT Key.
Viewing fuel remaining at each waypoint:
From the Active Flight Plan Page, move the FMS Joystick (right or left)
to quickly change the third data field to Fuel Remaining (FUEL REM).
118
First Data
Field
Data Field Selection (Active Flight Plan Page)
Garmin G300 Pilot's Guide
Second Data Third Data
Field Field
190-00921-00 Rev. E