Smart Airspace; Direct-To Navigation - Garmin G300 for Cessna SkyCatcher Pilot's Manual

SMART AIRSPACE

Smart Airspace shows airspace at and immediately surrounding the aircraft's
current altitude in bold. Airspaces at all other altitudes are de-emphasized.
De-emphasized
Airspace

5.6 DIRECT-TO NAVIGATION

The Direct-to method of navigation, initiated by pressing the Direct-to Key is
quicker to use than a flight plan when the desire is to navigate to a single point
such as a nearby airport.
Once a direct-to is activated, the G300 establishes a point-to-point course line
from the present position to the selected direct-to destination. Course guidance
is provided until the direct-to is replaced with a new direct-to or flight plan, or
cancelled.
Entering a waypoint identifier, facility name, or city as a
direct-to destination:
1) Press the Direct-to Key. The Direct-to Window is displayed (with the
active flight plan waypoint as the default selection or a blank waypoint
field if no flight plan is active).
2) Turn the FMS Joystick clockwise to begin entering a waypoint identifier
(turning it counter-clockwise brings up the waypoint selection submenu
- press the CLR Key or the FMS Joystick to remove it), press the
RECENT Softkey to display a list of recent waypoints, or move the FMS
Joystick to select the facility name, or city field.
3) Press the ENT Key.
4) With 'Activate' highlighted, press the ENT Key.
190-00921-00 Rev. E
Smart Airspace
Garmin G300 Pilot's Guide
GPS Navigation
Bold Airspace
113