Updating G300 Databases - Garmin G300 for Cessna SkyCatcher Pilot's Manual

UPDATING G300 DATABASES

The G300 database updates can be obtained by visiting the 'flyGarmin' website
(www.fly.garmin.com). After the databases have been updated, check that the
appropriate databases are initialized and displayed on the splash screen during
power-up.
NOTE: The databases are stored internally on each GDU. When updating
a two display system, each GDU will need to be updated individually
using the same SD card.
The G300 database updates can be obtained by visiting the 'flyGarmin' website
(www.fly.garmin.com). The 'flyGarmin' website requires the unit's System ID to
update databases. This allows the databases to be encrypted with the unit's
unique System ID when copied to the SD Card.
Obtaining the System ID:
1) Press the MENU Key twice to access the Main Menu.
2) Select 'System Setup' and press the ENT Key.
Or:
Select 'Database Information' and press the ENT Key.
System ID
190-00921-00 Rev. E
System Setup Page
Database Information Page
Garmin G300 Pilot's Guide
Appendix C
247