Bearing Pointers And Information Windows - Garmin G300 for Cessna SkyCatcher Pilot's Manual

Flight Instruments
Adjusting the CDI scale:
From the split-screen or full-screen PFD, press the RNG Key down arrow to
zoom in (decrease CDI scale), or the up arrow to zoom out (increase CDI
scale).
The current CDI scale appears in the upper right corner of the HSI.

BEARING POINTERS AND INFORMATION WINDOWS

Two bearing pointers and associated information can be displayed on the HSI
for GPS sources. The bearing pointers are light blue and are single-line (Bearing
Pointer 1) or double-line (Bearing Pointer 2). A pointer symbol is shown in the
information windows to indicate the navigation source. The bearing pointers
never override the CDI and are visually separated from the CDI by a white ring
(shown when the bearing pointers are selected but not necessarily visible due to
data unavailability).
When a bearing pointer is displayed, its associated information window is also
displayed. The Bearing Information Windows are displayed at the lower sides of
the HSI. The following information may be displayed in the Bearing Information
Windows:
• Bearing source (GPS)
• Pointer icon (single lined or double
lined)
64
Horizontal Situation Indicator (HSI)
Garmin G300 Pilot's Guide
Current
CDI Scale
• Station/waypoint identifier (GPS)
• GPS-derived great circle distance
to bearing source
190-00921-00 Rev. E