Selecting A Runway - Garmin G300 for Cessna SkyCatcher Pilot's Manual

If duplicate entries exist for the entered facility name or location, additional
entries may be viewed by continuing to turn the FMS Joystick during the selection
process. If duplicate entries exist for an identifier, a Duplicate Waypoints Window
is displayed. Press the ENT Key to move the cursor to the Duplicate Waypoints
Window.
Duplicate Waypoints Window
Waypoint Information Window-Duplicate Identifier

Selecting a runway:

1) With the Waypoint (WPT) Page displayed, press the INFO Softkey.
2) Press the FMS Joystick to activate the cursor.
3) Turn the FMS Joystick clockwise to begin entering a waypoint identifier
for the desired runway (turning it counter-clockwise brings up the
waypoint selection submenu - press the CLR Key or the FMS Joystick
to remove it), or move the FMS Joystick to select the facility name, or
city field.
4) Press the ENT Key. Full-Screen: continue to Step 7.
5) Press the RUNWAY Softkey (split-screen only).
6) Press the FMS Joystick to activate the cursor (split-screen only).
7) Move the FMS Joystick to place the cursor in the 'Runway' Box, on the
runway designator.
190-00921-00 Rev. E Garmin G300 Pilot's Guide
GPS Navigation
99