GPS Navigation
SATELLITE VIEW
The Satellite View displays satellite imagery above 20nm.
Displaying/removing satellite imagery on the map page:
1) Press the MAP Softkey on the Map Page. Press the VFR MAP Softkey
(if necessary).
2) Press the SAT VIEW Softkey. Satellite imagery is displayed on the
map.
3) Press the SAT VIEW Softkey again to remove satellite imagery from
the Navigation Map.
Or:
1) From the Map Page, press the MENU Key.
2) Turn or move the FMS Joystick to highlight 'Set Up Map', and press the
ENT Key.
3) Turn the FMS Joystick to highlight the 'Map' Category from the
horizontal list.
4) Move the FMS Joystick to highlight the 'Satellite View' field.
5) Turn the FMS Joystick to select 'On' or 'Off', and press the ENT Key.
VFR MAP
Softkey
MAP SYMBOLS
Refer to Appendix F for a list of map symbols.
92
Satellite View (Map Page)
(Split-Screen)
Garmin G300 Pilot's Guide
SAT VIEW
Softkey
190-00921-00 Rev. E