Updating Garmin Databases - Garmin GTN 750 Pilot's Manual

Updating Garmin Databases

Foreword
1. Download the data to the data cards from the appropriate web site.
Getting
Started
2. Insert Navigation Database SD card in the slot of the GTN 7XX.
Audio &
Xpdr Ctrl
3. Apply power to the GTN 7XX System. View the power-up splash screen. Check
that the databases are initialized and displayed on the splash screen. Some
Com/Nav
databases can take up to 15 minutes to update.
FPL
4. The database update page will prompt to either Update or Continue. Touch the
Update key to update the database(s). Touch the Continue key to continue
Direct-To
to normal operation without updating a database. This process will repeat for
each database that is available on the card for updating.
Proc
5. After the database(s) have completed the update process, touch OK to continue
the normal progression of start-up displays.
Charts
6. From the Home page, touch the System key. Then, touch the System Status
Wpt Info
key.
Map
7. Check that all databases are current and there are no errors. If a database is
highlighted in yellow, it is either expired or the GTN 7XX can not determine the
Traffic
date.
Terrain
Weather
Nearest
Music
Utilities
System
Messages
Symbols
Appendix
Index
19-12
Garmin GTN 725/750 Pilot's Guide 190-01007-03 Rev. B