Information Codes - Samsung DV457E User Manual

PROBLEM SOLUTION
Shuts off before the Jead is • The dryer load is toe small. Add mere items or a few tewels and
e
Lint on clothes •
e
e
e
Garments still wrinkled after *
Wrinkle-Care •
e
Odors remain in clothing *
after Refresh.
Water drips from the nozzle *
when Steam-Care starts
Sprayed water is not visible *
during Steam-Care
restart the cycle.
The dryer load is toe large. Remove some items and restart the
dryer.
Make sure the lint filter is cleaned before every load. With some
loads that produce high amounts of lint, it may be necessary to clean
the filter during the cycle.
Some fabrics are lint producers (for example, a fuzzy white cotton
towel) and they should be dried separately from clothes that are lint
trappers(for example, a pair of black linen pants).
Divide larger loads into smaller loads for drying.
Check pockets thoroughly before washing and drying clothes.
Small loads of 1 te 4 items work best.
Load fewer garments.
Load similar-type garments.
Fabrics having strong odors should be washed in a normal cycle.
This is steam condensation. The dripping water will stop after a short
time.
Sprayed water is difficult te see when the door is closed.
iNFORMATiON CODES
Samsung's Smart Care, an automatic error-monitoring
system, detects and diagnoses problems at an early stage
and provides a quick and easy solution through LCD
navigation.
When your dryer has a problem, the notification screen
will show the information and solution te help you better
understand what is occurring with your dryer and how to
solve the problem.
Information codes may be displayed to help yeu better understand what is occurring with your Dryer.
tE The thermistor resistance is very
low or high.
The resistance of the thermistor
tE3 fer the vent blockage detection is
very low or very high.
HE Invalid heating Temp in running
the dryer
dE Running the dryer with door open
Clean the or vent.
If the problem continues, call fer service.
Clean the screen or vent
If the problem continues, call fer service.
Call fer service.
Clean the door and then restart.
If the problem continues, call fer service.
TrouNeshoot[ng 59
I DV457E(GFO2836E ENindd Sec6:59 2012-04-09 D_4:15:51