Samsung DV457E User Manual page 469

5. Tap the appropriate option button to control the
drying level, temperature, time, and extras.
Depending on each cycle group or cycle, some
of the options can be disabled.
• The Dry level option cannot be changed in
the Manual Dry cycles and Steam cycles.
When you tap the Dry level option, the Dry
level buttons are disabled.
• The Time option cannot be changed in the
Sensor Dry cycles and the only Refresh
of Steam cycles. It is automatically set to
Automatic in both cycle groups. When you
tap the Time option, the time buttons are
disabled. See the figure above, right.
• You can set the Time option in Manual
Dry cycles (Air Fluff, Quick Dry, and Time
Dry) only. Tap a pre-existing time button
or tap the up / down arrows to change the
time from the automatically set times in the
Manual Dry cycles.
• The Extras settings can only be turned On
or Off.
6.
Tap the left arrow ( _ ) if you want to
return to the Cycle pane and select a
different cycle.
Press the Start/Pause button to start the load.
The Cycle Status screen is displayed on the
LCD panel.
_} ress the Power button to cancel the
cycle and turn off your dryer.
Do not place anything on top of your dryer
while it is running.
When the cycle is finished:
After the total cycle has finished, the Cycle
complete screen is displayed. It shows the cycle
name and a summary review of its phases, and
allows you to start a new load.
1. Open the door.
2. Remove the laundry.
Drying a load of laundry 37
I DV457E(GI-02836E ENindd Sec3:37 2012-04-09 _4:15:44