Information Codes - Samsung DV16T8520 Series User Manual

Troubleshooting

Information codes

If the dryer fails to operate, you may see an information code on the screen. Check the table below and try
the suggestions.
Information
code
tC Air temperature sensor issue
Compressor temperature sensor
tC5
issue
dC Running the dryer with door open
HC Compressor overheat
9C2
Low voltage detected
Water tank full
5C
Drain pump is out of order
nC Filter issue
Inner cover of the heat exchanger
nC2
issue
If any information code keeps appearing on the screen, contact a local Samsung service center.
46 English
DV8700TK_DV16T8520BV_DC68-04223Q-00_EN.indd 46
Meaning
Clean the lint filter and/or heat exchanger filter. If
this continues, call for service.
Wait 2-3 minutes. Turn the power on and restart.
Close the door and restart.
If this continues, call for service.
Call for service.
Check if the power cord is plugged in. If this
continues, call for service.
Empty the water tank, turn the power on, and
restart. If this continues, call for service.
Check if the filter is assembled correctly. If this
continues, call for service.
Check if the inner cover of the heat exchanger
is assembled correctly. If this continues, call for
service.
Action
2021/6/23 15:51:31