Final Installation Checklist; Dryer Exhaust Tips - Samsung DV457E User Manual

FINAL INSTALLATION CHECKLIST
• the dryer is plugged into an electrical outlet and is properly grounded.
• The exhaust ductwork is hooked up and the joints are taped.
• A plastic flexible duct is NOT used.
• Use rigid or stiff-walled flexible metal vent material.
• The dryer is level and is sitting firmly on the floor.
• Gas models - the gas is turned on with no gas leaks.
• Start your dryer to confirm that it runs, heats, and shuts off.
DRYER EXHAUST TIPS
Z_A plastic or non-metal flexible duct presents a potential fire hazard.
WARNING
1o Make sure your dryer is installed properly so it exhausts air
easily.
2o Use a 4" diameter rigid metal duct. Tape all joints, including
at the dryer. Never use lint-trapping screws.
3. Keep ducts as straight as possible.
4o Clean all old ducts before installing your new dryer. Be sure
the vent flap opens and closes freely. Inspect and clean the
exhaust system annually.
Don't let a poor exhaust system slow the drying process by:
• Restricting your • Using a plastic, thin
dryer with a poor foil, or non-metal
exhaust system, flexible duct.
• Unnecessarily using • Allowing dented or
long ducts that have clogged ducts and
many elbows, vent.
Installing your _dryer 25
I DV457E(GI-02836E ENindd 25 2012-04-09 D_4:15:42