Samsung DV457E User Manual page 183

Starting a My Cycle
Follow the steps below to start a My Cycle to dry your laundry.
1. Tap the My Cycle button in the Cycle Selection screen. It will expand and show a list of 3
My Cycle buttons.
2. Tap the desired My Cycle button.
3. Press the Start/Pause button to start the load.
Using the Delay Start function
By activating the Delay Start function, you can set your dryer to start a load automatically at a
later specific time.
Activating
Follow the steps below to activate the Delay Start function.
1. Tap the Delay Start Off (!_) button located
at the bottom right of the Cycle Selection
screen. The Delay Start screen is displayed.
2. Tap the up / down arrows to set the time.
3. If the Smart Grid function is available, you can allow your dryer to find the most energy
efficient time (also called the most eco-friendly time) to run your load within the range around
the time you set.
4. Press the Start/Pause button to activate the Delay Start function with the options you set.
Tap the Cancel button to cancel the function.
5. You will be returned to the Cycle Selection screen.
You will see that the Delay Start OFF (_) button is changed to the Delay Start ON
(_@_)button.
Deactivating
Follow the steps below to deactivate the Delay Start function.
• Tap the Delay Start ON (_') button located at the bottom right of the Cycle Selection
screen.
The Delay Start function is deactivated and the button changes to the Delay Start OFF
(,_,) button.
Drying a load of laundry 39
I DV457E(GI-02836E ENindd Sec3:39 2012-04-09 _4:15:45