Cable Box Setup - ProScan PSVR74 User Manual

6,
]-urn on your satellite receiver and tune it to channel 100 and then
press MENU. Follow the on-screen directions.
DSS SETUP
Please turn on your
DSS Receiver and tune
it to channel 100.
Press MENU
to
continue
Once you have completed the setup, the VCR confirms the DSS
Setup is completed or canceled.
CABLE BOX
SETUP
This setup applies only when all channels are received through the
cable box. There are two steps:
The first sets up the VCR for the output channel of the cable box
signal.
The second sets up the VCR for a remote-controllable cable box so
the VCR can control the cable box by changing channels for timer
or VCR Plus+ recordings. Position the remote-controllable cable
box above the VCR as shown in the Connections section.
1. Press MENU to display the VCR MAIN MENU.
VCR MAIN MENU
mnvJ-
2 Timer Recordings
3 Time
4 Channels
5 Setup
6 Preferences
7 Audio
8 Language
0 Exit
2. Press 4 to display the CHANNELS menu.
CHANNELS
|mm
:T.;.;.;_m--:T:
2 Add/Remove Channels
3 Signal Type: CABLE
4 VCR Plus+ Setup
5 Cable Box Setup
6 DSS Setup
0 Exit
Cable Box
Setup
ALL CHANNELS: enter two numbers
for output channel of your cable box on
press INPUT.
ONLY SOME CHANNELS: if you only
use the cable box to tune premium
channels.
CANCEL SETUP: select to cancel.
10