Program Express; Timer Recording - ProScan PSVR74 User Manual

PROGRAM EXPRESS
Program Express allows you to quickly program the VCR for a
complete one-time recording using the VCR's control panel instead of
the on-screen menus. The VCR automatically turns off at the end of
the recording,
1. Insert a tape with the safety tab in place. Make sure the
correctly.
Z Open the control door in the lower left corner of the VCR's front
panel.
3 Press PROG. EXP. to activate the display. The channel numb
Front Panel Control Buttons
lOCK IS set
CHANNEL
TRACKING PROG. EXP.
CLEAR MENU INFO
1221
CHANNEL
flashes in the display panel.
}
4 Use the _p) (and dow'llr)(buttons to choose a channel, then
press PROG. EXP. to select it.
5, Repeat step 4 to enter START time, END time, DATE of recording,
and tape SPEED information,
Press PROG. EXP. when SAVE flashes in the display. SAVED
appears to let you know the program is set.
Use the _ (and dow'l)(buttons to review or cancel your
entries.
7. Turn off the VCR.
TIMER RECORDING
You can set up as many as eight timer recording
1. Press MENU to displaytheVCRMAIN MENU.
VCR MAIN MENU
m --=
2 Timer Recordings
3 Time
4 Channels
5 Setup
6 Preferences
7 Audio
8 Language
0 Exit
progra_
Timer Recording Information
Clock must be set correctly,
Insert a tape with the safety tab in
place and enough tape to record
the program,
The output of your cable box appears
in the Channel item of the timer
IS.
recording menu if you've set up the
VCR for a cable box for all channels.
PROGRAMS OVERLAP appears if you
have entered two programs where the
times overlap.
TIMER appears in the display when
you turn off theVCR and a timer
recording has been set. TAPE flashes if
there is no tape in theVCR.
If your cable box or satellite receiver
cannot be controlled by theVCR turn
it on and tune it to the channel you
want to record before the recording is
to begin.
#
31