ProScan PSVR74 User Manual page 73

VCR makes noise when stopped
VCR is removing tape from heads, This is normal, The head cylinder inside the VCR will continue to rotate for a few minutes after
you put the VCR in the stop mode.
Will not AUTO CHANNEL SEARCH active channels correctly
Check to rT]ake sure the antenna connections are secure and correct.
Check to make sure the Signal
Type:
CABLE/ANTENNA feature is set correctly.
If Detect Automatically was selected for the Signal Type in the AUTO CHANNEL SEARCH menu, try using either CABLE TV or
ANTENNA instead.
May not be necessary if using a cable box for all channels. Contact your local cable company for more information,
Tape plays back in slow motion
Press PLAY to return to normal playback.
Cassette with safety tab removed does not start to play automatically
Check to make sure the Auto Play ON/OFF feature is set to ON,
TIMER or TAPE indicator flashes
Check to make sure there is a cassette in the VCR when a timer recording is set,
Time counter disappears during searching
This is normal.
On-screen menus appear in English or French
Check LANGUAGE feature.
No stereo sound during playback
Check to make sure the
rape
Playback feature is set to HI-FI to hear stereo sound during playback.
Must use the AUDIO/VlDEO]acks on the back of the VCR to hear stereo sound.
Stereo audio too noisy
Stereo signal is weak. Set Reception: STEREO/SAP/MONO feature to MONO.
Press one of the TRACKING up or down buttons to minimize the noise.
Index and Zero Search features do not operate
Check to see if MOVIEII'I_ADVANCE feature is activated.
Cannot access MOVIEI_I_ADVANCE feature
Cassette must have safety tab removed and be recorded in SP speed.
Home Recording was selected for the tape type in the menu. Eject cassette and reinsert.
71