Timer Recording With Vcr Plus; Setting Up The Channel List; Using Vcr Plus - ProScan PSVR74 User Manual

TIMER RECORDING WITH VCR PLUS+
You can use VCR Plus+ to simplify timer programming by using the
PlusCode number shown in your local television programming guide.
Setting Up the Channel List
If auto VCR Plus+ channel list setup was not successful during
QuickSet and you did not manually set up the VCR Plus+ channel list,
you can do it now.
1. DisplaytheCHANNELSmenufromlhe VCRMAIN MENU.
2. Press 4 to display the VCR PLUS+ Setup menu, and press 1 to
display the VCR Plus+ Channel List screen.
3 Go to Setting Up Your VCR if you need more information on
setting up your VCR Plus+ channel list.
l _ _11
Using VCR Plus+
1. Press MENU to bring upthe VCR MAIN MENU.
VCR MAIN MENU
2 Timer Recordings
3 Time
4 Channels
5 Setup
6 Preferences
7 Audio
8 Language
0 Exit
VCR MAIN MENU
LI,I_
....
2 Timer Recordings
3 Time
4 Channels
CHANNELS
Add/Remove Channels
Signal Type: CABLE
VCR Plus+ Setup
VCR PLUS+ SETUP
-II
VCR+ Channel My Channel
5 46
4
3 > > > 23
2
1
Use OH+/ to select
Press 0 9 to change
Press MENU to save
Press 1 to display the VCR PLUS+ menu.
VCR PLUS+
Enter PlusCode Number
(from TV listing)
Press MENU to cancel
Enter the VCR PlusCode shown in your local television
programming guide.
VCR PLUS+
Enter PlusCode Number
(from TV listing)
12876
Press CLEAR to correct
Press MENU when done
VCR Plus+ and PlusCode are registered trademarks of Gemstar Development Corporation.
3 3