ProScan PSVR74 User Manual page 15

2. Press 4 to display the CHANNELS menu.
CHANNELS
mm.
_:::
: : L
2 Add/Remove Channels
3 Signal Type: CABLE
4 VCN Plus+ Setup
5 Cable Box Setup
6 DSS Setup
0 Exit
3,
Press 1 to display the AUTO CHANNEL SEARCH menu.
AUTO CHANNEL SEARCH
What type of signal
are you using?
1 Cable TV
2 Antenna
0 Cancel
4. Select one of the three AUTO CHANNEL SEARCH options.
Choices one and two are self-explanatory. If you choose Detect
Automatically, the VCR automatically detects which signal system
you have attached to your VCR.
AUTO CHANNEL SEARCH
Now scanning channel 14
Press any key to cancel
The VCR begins scanning for the available channels--this takes
about one to two minutes. The lowest channel is tuned once the
search is complete. Now pressing CHANNEL up or down should
only select the active channels.
I
Auto Channel Search
Use the Auto Channel Search
feature to place all available
channels in memory.
If you ever change cable or antenna
signals, you may need to Auto
Channel Search again.
Detect Automatically
A strong cable or antenna signal in
your area may cause Auto Detect to
mis-detect. If this should happen,
select 1 or 2 for the system you
have.
)
13