Cable Box Setup - ProScan PSVR75 User Manual

,
,
SAT SETUP
The VCR will now
receive all signals
from the SAT receiver
on channel 03.
Press MENU to continue
Press MENU and enter the code for your digital satellite receiver
from the Satellite Receiver Code List.
SAT SETUP
Enter the code for your
SAT receiver from the
list in your Userfs
Manual.
Press MENU to cancel
Turn on your satellite receiver and tune it to channel 1O0 and then
press MENU. Follow the on-screen directions.
Satellite Receiver Codes
Dishnet (Echo_ ............................. 078
GE ......................................... 000, 00 I
Hughes Network .......................... 077
Panasonic ...................................... 075
Primestaur...................................... 076
ProScan ................................. 000, 00 I
RCA ....................................... 000, 00 I
Sony .............................................. 072
Toshiba .......................................... 073
I This VCR may not control all models of_
J
the brands that are shown.
Please turn on your
SAT Receiver and tune
it to channel 100.
Press MENU to continue
Once you have completed the setup, the VCR confirms the
satellite receiver setup is completed or canceled.
CABLE BOX
SETUP
This setup applies only when all channels are received through the
cable box. There are two steps:
• The first sets up the VCR for the output channel of the cable box
signal.
The second sets up the VCR for a remote-controllable cable box so
the VCR can control the cable box by changing channels for timer
or VCR Plus+ GOLD system recordings. Position the remote-
controllable cable box above the VCR as shown in the
Connections section,
12