ProScan PSVR74 User Manual page 6

STEP 1 : UNPACK WHAT'S IN THE BOX
The following items come packed in the box:
VCR
Remote control
RF antenna cable
STEP 2: INSTALL BATTERIES IN THE
REMOTE CONTROL
Follow these steps whenever you need to install or change the
batteries in your VCR remote.
1. Remove the cover of the battery compartment.
2. Place batteries in remote, matching the + and - ends of each
battery to the diagram inside the compartment.
3. Replace the cover.
STEP 3: CONNECT YOUR VCR
If you connect your VCR to your home antenna or cable system and
then to your TV, use the VCR's IN FROM ANT. and OUT TO TVjacks
For a good signal as shown.
If you have a TV with AUDIO/VIDEO jacks, use these jacks for a better
connection. In order to hear stereo and hi-fi sound From the VCR, the
audio/video jacks must be used. Refer to the Connections section,
toward the back of the manual.
STEP 4: PLUG
IN
THE VCR
Match the wide blade of the plug with the wide slot in the outlet. Be
sure to insert the plug completely.
CA°LE. CAOLE °OX O,'
VCR out _%_'_
TV
JA gABLE!
NT[NNA
4