Stopping A Timer Recording - ProScan PSVR74 User Manual

4[ Press MENU to enter the VCR PlusCode number.
How often should this
program record'?
nmv
2 Daily (every day)
3 Weekdays (M F)
4 Weekly (once per week)
0 Cancel
5. Indicate how often you want the program to be recorded.
Program 1 (One time)
Channel 03 Cable
Start Time 08:00 PM
End Time 09:30 PM
Start Date 11/18/98 Wed
Tape Speed SLP
Press CLEAR to adjust
Press MENU to save
Change the speed with the SPEED button on the remote or
the program end time with the CLEAR button on the remote
(if necessary).
Changing the end time comes in handy when you ar
recording a program, such as a sporting event, that rr
exceed the scheduled broadcast time.
7, Press MENU to save the program,
Program 1 has been saved
Remember
to
insert a
recordable tape and
turn the VCR off before
the program start time.
Press MENU to continue
STOPPING A TIMER RECORDING
To stop or cancel a timer recording in progress (even an expr_
recording):
Press and hold the STOP button for several seconds until STC
appears,
VCR Plus+ Recording
Clock must be set correctly.
Insert a tape with the safety tab in
I_lace-- and enough tape to record the
program.
UNRECOGNIZED NUMBER...
PLEASE RE-ENTER appears when the
VCR does not recognize the PlusCode
number.
PROGRAMS OVERLAP appears if you
have entered two programs where the
times overlap.
TIMER appears in the display when
you turn off theVCR and a timer
recording has been set. TAPE flashes if
there is no tape in theVCR.
;siryour cable box cannot be controlled
by theVCR turn it on and tune it to
the channel you want to record before
3the recording is to begin.TheVCR
channel should be set to the cable
box's output channel, usually Channel
3or4.
34