Choosinga Vcr Connection; Advantages Of Audio/Video Cable Connections; Don'tforget About The Auto Tv/Vcr Feature - ProScan PSVR74 User Manual

CHOOSING
A VCR
CONNECTION
There are several different ways to connect your VCR, depending on
whether or not you have cable service, and if you have a cable box, and
whether some of the channels are scrambled, and maybe you have a
satellite receiver along with cable (but no cable box), or a satellite receiver
and no cable or...well, you get the picture.
Five connections are described in this section and one of them should
provide you with a VCR connection that works.
TV with RF]ack only
TV with audio/video]acks
TV with audio/video]acks and cable box to unscramble pay
channels only
TV with RF]ack and satellite receiver
TV with audio/video]acks and satellite receiver
If you need to connect additional components not shown in the diagrams
here (and are unsure of how to connect them), refer to the instruction
manual that came with that particular component.
ADVANTAGES OF AUDIO/VIDEO CABLE
CONNECTIONS
Using a simple antenna cable connection gives you good picture quality, If
your television has audio/video]acks, I highly recommend using them to
get even better picture quality and stereo sound when recording and
playing back videotapes. These connections give you more convenient
operation by not having to share the TV's antenna signal.
DON'T FORGET ABOUT THE AUTO
TV/VCR
FEATURE
The TV/VCR switch controls whether the picture signal is coming from the
VCR or the TV.
You can set the Auto TV/VCR feature to ON when using only the IN FROM
ANT. and OUT TO TV]acks and OFF when using the AUDIO/VIDEO
output]acks--so your TV signal is not interrupted when the VCR is turned
on. You can change the setting manually by using the TVoVCR button on
the VCR or the ANTENNA button on the remote.
59